Encoder Splitter 1000KHz Multiple Outputs
Multi-output Encoder splitter: This product is in modular form and has a master card and slave card. Maximum four cards can be cascaded on the single master card. Master Encoder splitter receives four signals from the increamental encoder or simulated encoder output from servo drive and converts these signals into two sets of encoder signals viz +A, -A, +B and - B. The output signals are optically isolated from the input signals. Slave Encoder card receives four encoder signals from master encoder card and gives two sets of encoder signals viz +A, -A, +B and -B.
Features
- Input signals 3-10 or 10-30VDC
- 10 Encoder output sets from single encoder input
- Sink / Source/ Push pull / Open collector (Transistor) outputs.
- Supply voltage 24-30 VDC@1Amp
- Output pulse voltage 5/10/24 VDC as per customer’s requirement.
- Each output can drive150mA load.
- Din rail mountable
Order Information
|
Sr.No |
Splitter Specifications |
Order Code |
| 1 |
Master, 4-10VPP input, DIN rail mounted |
QLOG-MSPL-5-DIN |
| 2 |
Master, 10-24VPP input, DIN rail mounted |
QLOG-MSPL-24-DIN |
| 3 |
4 Slave, 4-10VPP input, DIN rail mounted |
QLOG-SSPL-5-DIN |
| 4 |
Slave, 10-24VPP input, DIN rail mounted |
QLOG-SSPL-24-DIN |
Encoder PPR and pulse frequency calculations
|
Sr.No |
Encoder PPR |
Encoder Shaft RPM |
Pulse Freq |
Suitable Splitter |
| 1 |
1000 |
2000 |
333.34 KHz |
1000 KHz |
| 2 |
1000 |
5000 |
833.33 KHz |
1000 KHz |
| 3 |
1000 |
6000 |
1000.00 KHz |
1000 KHz |
Technical specifications
Input signal voltage: 3 VDC-30VDC, available is 2 varients 3-10VDC/10-30VDC
Max. input current: 5 mA
Min. input current: 1.6 mA
Max. output voltage: 30 VDC
Min.output voltage: 5.0 VDC
Max. load per output point: 150 mA
Continuous power dissipation at (or below) 25°C free-air temperature: 200mW
Input to output electrical isolation: 3.55 KV
Max. input current: 5 mA
Min. input current: 1.6 mA
Max. output voltage: 30 VDC
Min.output voltage: 5.0 VDC
Max. load per output point: 150 mA
Continuous power dissipation at (or below) 25°C free-air temperature: 200mW
Input to output electrical isolation: 3.55 KV
Applications
a) Connecting one encoder to multiple Servo Drives/PLC encoder modules.
b) To change encoder signal level.
c) To connect incremental encoder with Incompatible signal level to control system.
d) For connecting one signal level (5-30 VDC) to another signal level (5-15 VDC) with isolation.
b) To change encoder signal level.
c) To connect incremental encoder with Incompatible signal level to control system.
d) For connecting one signal level (5-30 VDC) to another signal level (5-15 VDC) with isolation.
Dimensions
|
Sr.No |
Encoder Splitter |
Height mm |
Width mm |
Depth mm |
| 1 |
Master |
126 |
75 |
65 |
| 2 |
Slave |
126 |
66 |
65 |
Standards/Approvals
CE certiified, PCB: IEC61373, Terminals: UL/CE
Optoisolator: UL, Profile & end plates: CE
Optoisolator: UL, Profile & end plates: CE
